
Instruments	Tel: +44 (0) 1737 649300 Fax: +44 (0) 1737 649301 info@wallaceinstruments.co.uk

page location: home > products > hardness > sample tables

Hardness

Sample Tables for Wallace Hardness Testers

Introduction

Wallace have developed a Quick Change Range of tables for use on the H 12 Micro, H 14 Dead Load & H 17 Shore Scale Hardness Testers. The tables simply locate on to precision dowels - no extra fixing is needed. It is anticipated that customers may need extra tables to meet their different testing requirements.

'V' Groove Tables H 18/1

H19-2 Small 'V' Groove
180mm x 76mm, 1 mm wide 'V' groove along length

H19-3 Medium 'V' Groove
180mm x 76mm, 4mm wide 'V' groove along length.

H19-4 Medium 'V' Groove
180mm x 76mm, 8mm wide 'V' groove along length

Matrix Table H19-5

180mm x 76mm.

The matrix consists of 126 holes that are located on 10mm centres. Alternate holes are tapped to accept M3 threaded screws or drilled to 3mm to accept a 3mm diameter parallel dowel.

The accuracy of the matrix allows precise location of jigs and fixtures.

'O' Ring Holder H19-ORA

	Two gear driven inclined pins rise from the surface to securely locate the 'O' ring so that the ring is always correctly located. Can handle 'O' ring Cross - Section Diameters from 1 - 6mm.

Oversized Table H19-7

	300mm x 76mm Flat surface to allow easy positioning of very large samples.

Vacuum Specimen Table H19/VAC

This is an alternative sample table used to hold thinner samples flat on the table and requires the use of a Vacuum Pump (X2). This is ideal for use with the Micro Hardness Tester (H12) and the Shore M (H17M) instruments.

Custom Tables

Wallace can offer custom designed tables for special applications.

2 Gatton Park Business Centre
Wells Place
Redhill, Surrey
RH1 3LG

Instruments